Products

Features:

• Twin plate wafer design
• Simplicity installation.
• Compact in structure and light in weight design
• Quick close operation
• Eliminating water hammer effect by quick-close action.

Application:

• Suitable use for fire protection, piping and pumping system
• Suitable for mounting in vertical and horizontal position
• Mounting between flanges
• Operating Temperature : -20°C - 120°C
• Medium : Liquids

Features:

• Bolted Bonnet
• Outside Screw & Yoke
• Handwheel Operation
• Metal to metal sealing
• Renewable seat and disc
• Design and Manufacture conform to MSS SP-85
• Flange drilling complies with ANSI B16.1 class 125
• Tested in accordance with MSS SP-85

Application:

• Suitable use for plumbing and pipeline
• Maximum Operating Pressure : Non-shock 200 psi
• Operating Temperature : -29°C - 65°C
• Medium : Water, Oil, Gas, and Steam

Features:

• Plugged Blow-off
• Flanged Ends
• Bolted Cover
• 304 Stainless Steel Mesh
• Flange drilling complies with ANSI B16.1 class 125

Application:

• Removing unwanted debris from piping system
• Maximum Operating Pressure : 175 psi
• Operating Temperature : 0°C - 38°C
• Medium : Water

Features:

• Flanged Ends
• Bolted Cover
• 304 Stainless Steel Mesh
• Allowing large flow rate with minimal pressure drop
• Flange drilling complies with ANSI B16.1 class 125

Application:

• Removing unwanted debris from piping system
• Maximum Operating Pressure : 175 psi / 125 psi
• Operating Temperature : 0°C - 65°C / 177°C
• Medium : Water / Steam

Features:

• Flanged Ends
• Drain plug
• 304 Stainless Steel Mesh
• Cover is secured with quick-opening knobs to minimize service time
• Allowing large flow rate with minimal pressure drop
• Flange drilling complies with ANSI B16.1 class 125

Application:

• Removing unwanted debris from piping system
• Maximum Operating Pressure : 200 psi
• Operating Temperature : 0°C - 65°C
• Medium : Water

Features:

• Screwed Ends
• Blow-out proof Stem
• Designed and tested to MSS SP-110
• UL/FM Approval
• NSF61 Approval

Application:

• Suitable use for plumbing, industrial, oil/gas, and sprinkler piping system.
• Maximum Operating Pressure : 600 W.O.G / 150 psi Saturated Steam
• Operating Temperature : -18°C - 204°C
• Medium : Water / Oil / Gas / Steam

Features:

• Screwed or grooved Ends
• A single handle ball valve
• Tamper resistant sight glass
• Complies with the requirements of NFPA 13
• UL/FM Approval

Application:

• Suitable use for both the test function and the express drain function for a wet fire sprinkler system.
• Can be installed either vertically or horizontally.
• Maximum Operating Pressure : 300 psi
• Operating Temperature : -10°C to 120°C
• Medium : Water

Features:

• Automatic ball float operation
• Releasing air in the pipework through the vent hole
• Simple design and maintenance free

Application:

• Suitable use in a dry riser system, wet riser system, automatic sprinkler and fire hose reel system.
• Vertical installation
• Maximum Operating Pressure : 175 psi / 12 bar
• Medium : Water

Features:

• Isolating noise and vibration
• Floating flanges allow for easy installation.
• Compensate for system misalignments
• Absorb pipework stresses
• Absorb water pulsation and minimizes water hammering.

Application:

• Applicable for suction and delivery
• Feed-water and drainage equipment in marine piping systems.
• Applicable for use in power generation and chemical plants.
• Marine applications
• Maximum Operating Pressure : 16 bar
• Operating Temperature : -20°C - 100°C
• Vacuum Rating : 650mm/Hg
• Medium : water, air, and mild corrosive fluids

Features:

• Indicates if the valve underneath is in the OPEN or SHUT position
• Provides a means to operate a buried or otherwise inaccessible valve.
• The adjustment range of the indicator post is 34.5” to suit the deeper buried valve and can be easily adjusted in the field.
• The wrench handle fits over a “U” bracket on the barrel, and may be fixed with a padlock to secure the operation wrench to the barrel.
• UL Listed and FM Approved

Application:

• Vertical indicator post are used to identify the position of buried Gate Valves and are recommended for use in fire protection piping systems
• Maximum Operating Pressure : 16 bar
• Medium : water

Features:

• Indicates if the valve is in the OPEN or SHUT position
• Used to operate a valve installed behind a wall.
• With a 12” O.D. post flange to mount on a wall.
• Handwheel operation
• UL Listed and FM Approved

Application:

• The Wall Mount Indicator Post is used to operate a valve installed behind a wall and are recommended for use in fire protection piping systems

Features:

• LG2 Bronze made hydrant with superior corrosion resistance
• Customized Flanged connection
• Hydrostatic Tested with 30 bar and leakage free.
• Maintenance Free

Application:

• Applicable to Fire Fighting Systems : Both on-shore and off-shore
• Operating temperature : 0°C ~ 120°C
• Maximum Operating Pressure : 16 bar
• Medium can be seawater and fresh water

Features:

• Customize Fabrication
• Available in variety of sizes and configuration for wide range of flow rate and orientation
• Available in Flanged connection, Grooved connection, and threaded connection
• Available in Carbon steel or Stainless Steel
• Hydrostatic Tested with 30 bar without leakage.

Application:

• Installed in open deck areas, walk passage, and escape routes for firefighting purpose.
• Maximum Operating Pressure : 20 bar
• Medium can be seawater and fresh water

Features:

• T Type 3-Way Cock
• Compact and simple design
• Flange design in accordance to JIS B2240
• Designed and constructed in accordance to JIS F7381 standard
• 5 bar Hydraulic tested in accordance to ISO 5208 standard

Application:

• Suitable use for shipbuilding, ship repair and oil platform.
• Maximum Operating Pressure : 5 bar
• Medium can be water or oil

Features:

• Outlet can be threaded or Nakajima fittings
• Flange design in accordance to JIS B2240
• Designed and constructed in accordance to JIS F7334 standard
• Tested and inspected in accordance with JIS F7400 standard

Application:

• Suitable use firefighting system, deck washing, marine boiler, air motor, suction purposes.
• Maximum Operating Pressure :

• Medium can be sea water, fresh water, steam, and compressed air